|Category||Value Added Products|
Chair & Washing UPHOLSTERY:
It becomes unhygienic & filthy after repeated use or spillage of food or other products on car seats. With a steam base interior cleaner that uses steam vapor to remove dirt, stains, and grease from the car's upholstery, you can clean it from us. Steam has the inherent ability to sterilize and deodorize without getting soaked after a few hours.
SCAR RUBBING & POLISH EXTERIOR:
Owing to different causes, such as small scratches, coal tar, glue, water stains, fading & swirl marks of regular cleaning that can not be managed by usual soap washing, car shine has gone off over a period of time. You can choose car body rubbing & polishing with rubbing compound for this.
Nitrogen is a non-flammable, inert gas that prevents and allows it more stable from freezing, expanding and holding tyre temperatures down. Although humidity & oxygen expand in normal air when hot, it increases the pressure of the tyres and makes it difficult to drive & decrease the life of the tyres. Today, due to the tyre burst at Yamuna-Express-way, where high speed driving with regular air-filled in weekly tyres makes a deadly combination with concrete lane, we get frequent news of car accidents. Concrete roads produce high friction, creating more heat and noise than tar coal roads, contributing to the burst of tyres. Nitrogen gas in tyres can also prove to be a lifesaver for long hours of high-speed driving.
Synthetic oil is a chemical base oil developed in the laboratory to provide higher performance and profit levels that can withstand extreme engine temperatures (above 400 ° F). Superior lubrication, which greatly decreases friction, engine noise and wears & tears in the long term, is the main benefit of synthetic oils. Regular oil is a mineral base taken from the field and refined, but it contains acid, wax and other sludge-generating components.
THROTTLE BODY & CLEANING AIR INTAKE SYSTEM:
There are deposits of carbon and sludge in the throttle & PCV system that interrupt the rough idle, stumbling or even stalling air flow casing. For this, we clean the throttle body to boost starting, drivability and fuel average by advanced chemical spray at standard pressure. At 20,000 KM & than repeated as per requirement \ operation, it is recommended for the first time and performed more frequently in LPG/CNG vehicles.
Decarburization is performed for carbon building removal due to different factors, such as excessive fuel burning, substandard fuel quality and general age build-up. This build-up of carbon can lead to valves not closing properly, fouling of spark plugs, failure of exhaust sensors, low pick-up and low mileage, and other problems. De-carbonization is carried out by means of fuel supply (petrol/diesel) that dissolves and eliminates the carbon deposit in different parts of the engine that is expelled through the exhaust pipe without opening the engine using specific chemicals. The key benefits are smoother engine operation and original compression restoration.
FOR DIESEL ENGINE EGR CLEANING:
Diesel cars have an Exhaust Gas Recirculation (EGR) valve that recirculates the combustion cycle with a small volume of exhaust. To regulate the exhaust gas flow, EGR valves open and close. If left open, the excess vacuum can cause the engine to behave like it wants to stall, idling roughly or surging and closing the valve leads to low mileage and low pick-up knocking or pinging. We need to get a clean EGR valve for the engine to run smoothly. At 30000 KM & then repeated as per requirement or operation, it is recommended to clean first.
Unique Offer for CORPORATE & RWA :
If you have more than 10 cars, we will make a special deal for you, such as cheque payment or credit facilities, etc. Please make it easy to call or meet our in-charge customer service manager or workshop for information.